Ronseal Precision Finish Fence Sprayer

The below steps will help optimise the Precision Fence Sprayer application. Push down the handle of the sprayer and rotate anticlockwise until the pump pulls out.�Pour the sprayable liquid into the tank.� Pressurise the sprayer until the pressure release valve opens.You should hear a slight hissing noise.�Move down the fence and overlap your previous spray by 50 percent. Aftercare -Push the pump handle all the way down. Lift the pressure release valve until you can no longer hear any hissing.� Once the pressure has escaped unscrew the pump unit and tip any leftover liquid back into its tub.�Rinse out the sprayer several times with clean water and refill with clean water. Pressurise again and spray it through the nozzle until the water runs clear Its best to do this on the speed setting.� To clean the wand unscrew the handle from the trigger and clean the filter with clean water.�Remove the nozzle and white filter and clean with warm, soapy water and an old toothbrush. Remove the nozzle and white filter and clean with warm, soapy water and an old toothbrush.Dont use a sharp object as this will damage the nozzle and ruin the spray pattern.�